UNIVERSAL FIRE STOP FS-700
FS-700 UNIVERSAL FIRE STOP
Commercil/Industrial/Residential
Excellent fire stop compound for electrical, plumbing and cabeling penatration holes.
Sold in 1 gallon and 5 gallon containers.
APPLICATIONS: COMMERCIAL, INDUSTRIAL AND RESIDENTIAL FIRE STOP, FIRE BLOCK Fire Rated Class "A". Specifically formulated for maximum protection. Acts as a heat and flame shield. One gallon and 5 gallon containers.
Used as a firestop for holes created to install cabling, electrical, plumbing and other wall penetrations.
An exclusive formula, flame and heat inhibiting organic compound fire stop. Compound, putty, sealant and caulking. A SUPERIOR GRADE. Fire Rated Class "A".
Specifically formulated for maximum protection on ceilings and walls, steel beams where high fire and heat resistance is required.
INTERIOR applications, meets and exceeds the Class I, Class II, UL 1479, ASTM E-814, and NFPA 255 for surface burning characteristics for applied coatings.
Can be applied to porous and non-porous surfaces. For other uses contact your distributor or corporate office. A system to achieve 1 and 2 hour ratings.
Because it can be applied on most surfaces and hard to reach areas, FS-700™ solves many problems that must be addressed.
Can also be used as a fire stop. 1/4 inch= 30 min.. 1/2 inch=1 hour. 1 inch =2 hour resistance. Tested by Universal Protective Technologies under direct flame 2000 degrees. UNIVERSAL FIRE-SHIELD™, UNIVERSAL PROTECTIVE TECHNOLOGIES are leaders dedicated to setting standards for Fire Prevention Applications through our on going research and development.
It is our resolve to educate and inform the architect, builder, manufacturer, fire officials, and the public.
UNIVERSAL FS-700™ TRADE SECRET FORMULA - MSDS information:=This aqueous based resin compound mixed into other organic materials. Total Solids =89.1%, weight per gallon 9. I lbs., specific gravity = 1.33, PH factor =2.2-3.8, Flash Point Non-flammable, Color =light. red , Volatility= no petroleum or asbestos, Fungus= anti-fungus, Bacteria=mildly resistant, Linear shrinkage=sleight, Moisture absorption=None, Corrosion=Mildly, Preservative=excellent,. These chemicals and compounds comply with all United States Federal Regulations. Meets or exceeds city, county and state codes. There are no EPA issues to date. No PBDE.
For Commercial and Residential use.
APPLICATION PROCEDURE: Compound, putty, sealant and caulking. For large and small commercial building applications. Can be applied by hand trowel, grout bag. Works like putty. Allow to dry. Clean up as soon as possible, clean up equipment as soon as possible with water.
Non-toxic. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. If chemical gets into eyes wash out immediately flood with water. SAME PRECAUTIONS AS FOR ALL CHEMICALS AND PAINTS.
|